Zinsser® Mold Killing Primer, Interior/Exterior, Flat White, 1 gal Bucket/Pail, 2/Carton ;

Zinsser® Mold Killing Primer, Interior/Exterior, Flat White, 1 gal Bucket/Pail, 2/Carton ;

Item # ^RST276049CT

  • Paint directly over mold, mildew and stains.
  • Kills existing mold, mildew and odor-causing bacteria.
  • Protective, water-based formula for interior and exterior use.
  • Binds to chalky siding, masonry, metal, plaster and more.
  • Ideal for residential, commercial and industrial environments.
  • For extensive stains, pair with a Zinsser stain-blocking primer.
Manufacturers Item #276049CT
$131.53/CT

Zinsser Mold Killing Primer is a protective, water-based coating that can be applied directly over existing mold, mildew and odor-causing bacteria. Featuring a proven, registered and approved antimicrobial-fungicidal agent, it not only covers over associated stains but also kills all pre-existing fungal organisms. Use it directly on nearly any dry, debris-free, non-porous, interior or exterior surface with minimal pre-cleaning in just about any residential, commercial or industrial environment: homes, offices buildings, retail establishments, schools, hospitals, factories and more. And though this primer is compatible with any topcoat product, it pairs perfectly with Zinsser PERMA-WHITE Mold & Mildew-Proof™ paints. To fully cover over and obscure heavy stains, a second primer coat with a tailored, stain-blocking product may be required. In such scenarios, BIN and Cover Stain primers are highly recommended.

Paint Sub-Category: Primer; Water-Based; Intended Application Environment: Interior/Exterior; Finish/Sheen: Flat; Color(s): White.

  • Global Product Type Building/Construction Paints & Primers
  • Paint Sub-Category Primer; Water-Based
  • Intended Application Environment Interior/Exterior
  • Finish/Sheen Flat
  • Color(s) White
  • Color Family White
  • Number of Colors 1
  • Volume Capacity 1 gal
  • Packaging Type Bucket/Pail
  • Binder/Vehicle Ingredient(s) Styrene Acrylic
  • Diluent/Solvent Ingredient(s) Ethylene Glycol; Water
  • Pigment/Dye/Filler Ingredient(s) Calcium Carbonate
  • Application Method Brush; Roller
  • Recommended Level of Ventilation Moderate
  • Application Temperature Range 50° to 80° F
  • Applicable Surface Material Cement/Concrete; Drywall; Glass/Ceramics; Masonry; Metal; Plaster; Plastic; Wood
  • Maximum Coverage Area 400 to 450 sq ft
  • Cure/Dry-Time Range 30 min (Touch); 1 h (Handle/Recoat); 7 days (Full Cure)
  • Age Recommendation Ages 16 and Up
  • Product Biodegradability Indicator N
  • Product Biodegradability in Days 0
  • Product Compostability Indicator N
  • Compliance Standards EPA Reg. No. 87469-1-69587
  • Pre-Consumer Recycled Content Percent 0%
  • Post-Consumer Recycled Content Percent 0%
  • Total Recycled Content Percent 0%
  • Disclaimer Statement Do not apply when air or surface temperatures are below 50° F (10° C) or when drying conditions are poor. Not recommended for new or unpainted metal and vinyl siding or for floors, decks and other surfaces subjected to full-immersion and/or prolonged contact with water. For optimal protection, apply topcoat product within 72 hours.
  • Footnote 1 Recommended Dry Film Thickness (DFT) Per Coat: 1 to 2 mil
  • Footnote 2 Recommended Wet Film Thickness to Achieve DFT: 2.5 to 5 mil
  • Country of Origin US
  • Carton Pack Quantity 2
  • Pack Quantity 0
  • UPC 020066237912
  • UNSPSC 31211509